公司新聞

壓路機原理其實是非常簡單的！

來源：http://id888.com.cn/ 日期：2023-04-28

壓路機原理其實是非常簡單的，振動軸就像普通汽車上的汽車輪軸一樣轉動，在振動軸上有偏心塊，假設軸不是均勻?qū)ΨQ的圓柱狀，而是有較大的突出位置，這個突出部位在轉到上方和下方時會對軸產生不同的作用力，這樣就能引起小型壓路機振動軸的振動。具體是怎樣的呢？下面濟南壓路機租賃廠家為您分析：

The principle of a roller is actually very simple. The vibrating shaft rotates like the wheel shaft of a regular car, and there are eccentric blocks on the vibrating shaft. Assuming that the shaft is not a uniformly symmetrical cylindrical shape, but has a large protruding position, this protruding position will generate different forces on the shaft when turned above and below, which can cause the vibration of the vibrating shaft of a small roller. What exactly is it? Below is an analysis by the rental manufacturer of Jinan road rollers for you:

一、受力作用原理

1、 Principle of force action

壓路機的受力作用原理是通過重力來壓實土壤，并且使路面平整。通常，壓路機通過機身的重量來產生直接的壓力作用于土壤或路面上。

The force acting principle of a road roller is to compact the soil through gravity and make the road surface flat. Usually, a roller generates direct pressure on the soil or road surface through the weight of its body.

二、振動作用原理

2、 Principle of Vibration Action

其次，壓路機的振動作用原理就是通過機身的振動來幫助土壤或路面變得更加緊密、堅固，以達到更好的壓實效果。振動作用原理的關鍵在于振動軸，振動軸激振壓路機的整個機身，使其向下和向前振動，從而通過壓實和整平的方式壓實土壤和路面。振動的頻率和振幅對于壓實效果有很大的影響，需要根據不同的土質、厚度和壓實要求進行調整。

Secondly, the vibration principle of the roller is to help the soil or road surface become more compact and sturdy through the vibration of the machine body, in order to achieve better compaction effect. The key to the principle of vibration action lies in the vibrating shaft, which excites the entire body of the roller to vibrate downwards and forwards, thereby compacting the soil and road surface through compaction and leveling. The frequency and amplitude of vibration have a significant impact on the compaction effect, and adjustments need to be made based on different soil properties, thicknesses, and compaction requirements.

三、滾動作用原理

3、 Rolling action principle

壓路機還有滾動作用原理，它是通過輪胎的滾動向土壤施加壓力來使其緊密，并且使路面平整。滾動作用只適用于瀝青路面，其原理就是壓路機通過輪胎的滾動使路面粉化、翻轉，從而產生壓縮作用，進一步提高路面的密實度。

The roller also has a rolling action principle, which applies pressure to the soil through the rolling of the tires to make it compact and make the road surface flat. The rolling effect is only applicable to asphalt pavement, and its principle is that the roller pulverizes and flips the road surface through the rolling of tires, resulting in compression and further improving the compactness of the road surface.
濟南壓路機租賃

操作流程

Operation process

1.檢查機器：在使用壓路機之前，必須進行充分的機器檢查，確保機器的各個部分都處于良好的狀態，特別是機器的輪胎、油箱和發動機等部分，必須做好保養和維護工作。

1. Machine inspection: Before using the road roller, sufficient machine inspection must be carried out to ensure that all parts of the machine are in good condition, especially the tires, fuel tank, and engine parts of the machine, which must be well maintained and maintained.

2.開啟機器：打開機器的電源開關，并開啟空調和風扇等輔助設備。

2. Turn on the machine: Turn on the power switch of the machine and turn on auxiliary equipment such as air conditioning and fans.

調整振動器：根據需要選擇振動器或震蕩方式，調整振動頻率和振幅，以達到佳壓實效果。

Adjusting the vibrator: Select the vibrator or vibration method as needed, adjust the vibration frequency and amplitude to achieve optimal compaction effect.

3.開始作業：將機器駛?cè)牍ぷ鲄^(qū)域，按照預定的路線和速度，開始對路面或土工材料進行壓實作業。

3. Start work: Drive the machine into the work area and start compacting the road surface or geotechnical materials according to the predetermined route and speed.

4.監測工作：在工作過程中，要時刻監測壓實效果，并及時調整振動器的頻率和振幅，以確保路面或土工材料的壓實效果符合要求。

4. Monitoring work: During the work process, it is necessary to constantly monitor the compaction effect and adjust the frequency and amplitude of the vibrator in a timely manner to ensure that the compaction effect of the road surface or geotechnical materials meets the requirements.

5.結束作業：在完成壓實作業后，將機器開回車庫或停放區域，進行機器的維護和保養。

5. End of work: After completing the compaction operation, drive the machine back to the garage or parking area for maintenance and upkeep of the machine.

壓路機的工作原理是通過重力、振動和滾動的多種作用方式來實現對土壤或路面的壓實和整平，并且使其更加緊密、堅固、平整。其原理是對于土方工程不可或缺的關鍵環節。更多相關內容就來我們網站http://id888.com.cn咨詢!

The working principle of a road roller is to achieve compaction and leveling of soil or road surface through various modes of gravity, vibration, and rolling, and make it more compact, sturdy, and flat. Its principle is an indispensable key link for earthwork engineering. For more related content, come to our website http://id888.com.cn consulting service

上一條：簡述裝載機噪音大怎么辦

下一條：水泥穩定碎石如何正確順利使用